t (Operating Temperature) (1)
:
60 °C (max.)
Pd (Body Pressure Pmax) (2)
:
10-25 (max.) bar
(1) » The pump material varies depending on the type of fluid, operating temperature and pressure.
For more information, please refer to our company.
(2) » (Pmax: Suction Pressure + Pump Head in Closed Valve)
NB 1000 Series Pumps
It is designed to pump water and other harmless, non-explosive, not containing any solid particles and fibers, fluids. These pumps are are stainless steel jacketed high pressure, quiet, compact and low power consumption.
Technical Specifications
The direction of rotation is clockwise when viewed from above. In Standard production suction and discharge directions are in the same direction. Pump shaft: It has been supported between the motor bearings in the upper part and special journal bearings in lower part. The bottom bearing is cooled with water; the pump and the motor shaft are connected with rigid coupling. Motor: Air-cooled 2-pole, (Single Phase 1 ~, 220V, 50 Hz, three phase 3 ~ 380 V, 50 Hz) in accordance with IEC standards
Material Data
| Part Name |
Material |
| GG 25 |
AISI 420
[X 20 CR 13] |
AISI 304 |
NORYL |
BRONZ |
| Compression Body |
 |
|
|
|
|
| Suction Body |
|
|
|
|
|
| Shaft |
|
|
|
|
|
| Protection Panel |
|
|
|
|
|
| Diffuser Body |
|
|
|
|
|
| Impeller |
|
|
|
|
|
| Motor Carrier |
|
|
|
|
|
| Lower Bearing |
|
|
|
|
|
| Foot |
|
|
|
|
|
Motor Options According to The Number of Stages
