NKY Series Pumps;
It is suitable for pumping heat transfer oils and low viscosity industrial oils without containing any abrasive parts in.
Technical Specifications
- Horizontal shaft,volute, single-stage, end-suction, air-cooled, closed impeller centrifugal pumps.
- Suction and discharge flanges conform to EN 1092-2 / PN 16.
- All of the impellers have been dynamically balanced according to ISO 1940 class 6.3.
- Bearing group, seal bearing, pump shaft and the impeller can be dismantled without separating the volute off the piping installation thanks to the design that can be dismantled from the back.
Sealing of Shaft
- High temperature resistant single-acting type and mechanical seal is used.
Direction of Rotation
- The direction of rotation of pump is clockwise when viewed from the motor side.
Section Drawing
1 Volute Body
2 Impeller Nut
3 Wear Ring
4 Impeller
5 Seal (Wear Plates)
6 Housing Cover
7 Retainer
8 Air Bleed Plug
9 Gasket Mechanical Seal Cover
10 Ball Bearing
11 Bearing Races
12 Grease Nipple
13 Ball Bearing
|
14 Coupling Key
15 Bearing Cap
16 Grease Drain Plug
17 Support Foot
18 Mechanical Seal Cover
19 Mechanical Seal
20 Spacer (Mechanical Seal)
21 Shaft
22 Seal (Wear Plates)
23 Gasket (Body)
24 Wear Plate
25 Drain Plug
26 Impeller Key
|
